LED in Neck Section for Night Master/ XSearcher

This is the easy way to change LEDs in both the Night Master and XSearcher torches. Just select which LED you want and we will pre-install it into a neck section for you. Then, when you want to use it, just unscrew the head and body tube away from your Night Master or XSearcher and attach them onto the new neck section. It's quick and easy, and is the best way to change your LEDs in a field.

Click the 'Buy Now' button and select the colour LED you want; either white (use with 1 battery), white turbo (use with two batteries), red, green or yellow.

Red LED Module for Dereelight Night Master

Made to fit the Dereelight Night Master, this single-mode LED provides long-range, red light illumination for spotting and shooting. The optional extension tube can be used with this LED module to give you more lamping hours.

Green LED Module for Dereelight Night Master

Made to fit the Dereelight Night Master, this single-mode LED provides long-range, green light illumination for spotting and shooting. The optional extension tube can be used with this LED module to give you more lamping hours.

Yellow LED Module for Dereelight Night Master

Made to fit the Dereelight Night Master, this single-mode LED provides long-range, yellow light illumination for spotting and shooting. The optional extension tube can be used with this LED module to give you more lamping hours.

White XR-E LED Module (Night Master or XSearcher)

This white LED is specifically for the Night Master 800, '800-IR (infrared) and the XSearcher lights. It has two light settings; 1-mode (High mode) and 3-modes (Low-Mid-High). It is also available pre-installed into a neck section to make LED changes quicker and easier.

Choose from a 1-battery version or a 2-battery version (to use 2 batteries you will need to use the extension tube). Just click 'Buy Now' and make your selection.

Infrared LED (850nm) for Night Master/ XSearcher

We have developed this IR LED specifically for the Night Master and XSearcher. Being infrared the beam is invisible to humans and animals, but can be seen through a night vision device. Please note that this IR LED has a wavelength of 850nm (works great with most digital and tubed night vision devices).

Dereelight 18650 Extension Tube

The Dereelight 18650 extension tube allows for another 18650 battery to be used to boost runtime with the Night Master (when using with red, green and yellow LEDs only), DBS V3 and CL1H V4 lights, if the LED voltage range allows two 18650 batteries to be used.

NIGHT MASTER 18650 BATTERY 2600mAh

This is a high-power, lithium rechargeable battery provides hours of lamping time. There is no memory effect, so you can recharge it whenever you want to.

Dereelight Night Master/XSearcher Neck Section

Spare neck section for the Dereelight Night Master and XSearcher torches. Install your LED once, then all you have to do is swap the neck section of the lamp when you want to change colour. The neck section also comes with a spring and brass contact ring.

XSearcher Head for Night Master

The XSearcher head is an add-on for the Night Master 800 and '800-IR models. To use, you simply unscrew the Night Master head and replace it with this one - using your existing LED. It uses a 66mm convex lens, compared to a 50mm lens in the Night Master. This bigger lens provides a tighter beam and more distance. Despite being bigger, there is still sufficient clearance from a scope's 56mm objective lens tube when using the high scope mount supplied in the Night Master 800 kit.

Dereelight Remote Pressure Switch

This Dereelight Remote Pressure Switch can be used with the Dereelight Night Master, DBS V3 and CL1H V4 flashlight in order to provide remote activation when the flashlight is mounted on a rifle. The length is 23cm unstretched and 30cm stretched.

Fully Adjustable Scope Mount Set

This mounting set comes with two main pieces; a scope with with rail section on top and a fully adjustable rail mount with windage and elevation adjustment. Both pieces will fit 30mm and 1-inch tubes (with supplied spacers). These are for the shooter who wants full control of their illumination and to adjust the beam positioning for various distances.

Fully Adjustable Rail Mount
(Ideal for Pulsar N550/ N750)

This quick detach (QD) rail mount offers both windage and elevation adjustment and a lock function to secure your particular settings. It will fit both a 30mm and 1-inch tube (with supplied spacer). This QD mount very popular for use with the Night Master 800-IR infrared illuminator and the Pulsar N550/ N750 night vision device as it allows the user to adjust the beam for their shooting distance. It is suitable for rifles/ guns and night vision devices with rails.

Scope ring with top rail

This scope ring will fit both 30mm and 1-inch scope (using the supplied spacer) and provides a section of rail on top of the scope for fitting a quick detach (QD) mount. You can save £5 if you buy the Fully Adjustable Scope Mount Set, which includes this cope ring and the Fully Adjustable Scope Mount.

High Adjustable Scope Mount

This adjustable scope mount is taller than our standard scope mounts to allow for sufficient clearance of the scope for hunting/ shooting lights such as the Dereelight DBS V3 (also with the aspherical head) and the Olight M3X, which have large heads. This mount is very easy to use and will fit multiple size flashlight bodies and scopes - so you can fit a torch with 25mm body tube to a 30mm scope. It's very versatile.

Dereelight Red Filter

The Dereelight Red Filter has been specially designed to fit the DBS V3. It can be used for watching wildlife, since many animals cannot see well in the red spectrum. Red light also preserves our natural night vision and is effective at providing better visibility in fog and smoke.

Dereelight Blue Filter

The Dereelight Blue Filter has been specially designed to fit the DBS V3. Attach it to the head of the flashlight for blue light output, which is useful for hunting at night. The blue light makes it easier to see blood, so wounded animals can be tracked at night.

Dereelight Green Filter

The Dereelight Green Filter has been specially designed to fit the DBS V3. Attach it to the head of the flashlight for green light, which is useful for hunting at night in woodland areas or where there is a lot of foliage. The green light provides good night visibility without spooking animals.

Offset Gun Mount

This offset gun mount is precision machined and made from high grade aluminium with an anodised finish. It will clamp to a 20mm picatinny/ weaver rail system for weapon-mounting and will securely hold a torch with a 25mm/ 1 inch body tube. Allen key included.

Multi-Position Flashlight Gun Mount - Small

This torch gun mount is to be used with torches that have a 19 - 22mm body tube diameter, such as the Klarus ST10 and ST20. It attaches onto 20mm Picatinny rail systems with a spring lock/ release and offers 5 different angle options.

Multi-Position Flashlight Gun Mount - Medium

This torch gun mount is to be used with torches with a 25mm/ 1 inch body tube diameter, such as the Klarus XT10, XT20; Olight M20S, M3X; Fenix TK11, Tk12, TK15; Dereelight CL1H V4, DBS V3; Lumintop TD12, TD15, TD15X; Solarforce L2M, L2, L2P and many others. It attaches onto 20mm Picatinny rail systems and offers 5 different angle options.

Swivel Bike Light Mount for Flashlights

The Swivel Bike Light Mount has been made to give you full control over the lighting direction of your torch-mounted bike light - allowing for multi-directional, 360 degree adjustment. Made from high quality rubber, it provides resistance to shock and slippage. It has been made to fit flashlights that have a 25mm/ 1 inch body tube, such as the Olight M20S/ M30/ M3X, Klarus XT10/ XT20, Dereelight DBS V3/ CL1H V4, Lumintop TD12/ TD15/ TD15X, Fenix TK11/ TK12/ TK15 and Solarforce L2/ L2P/ L2M/ Skyline I.

Velcro Helmet/ Barrel/ Scope Mount

This universal mount can be used to attach a variety of things. It makes an ideal helmet mount for strapping a torch to your cycling helmet and works equally well as a barrel mount or velcro scope mount, for attaching a flashlight to the barrel of a rifle or onto a rifle scope. Made from rubber and tough velcro, it won't scratch and it is fully adjustable, so will fit various diameters.

Velcro Bike Torch Mount

This universal bike mount is made from rubber and tough velcro, it won't scratch and it is fully adjustable, so will fit various diameters.

Gun Barrel Torch Mounting Kit

This mounting kit includes a rail attachment that fits onto your gun barrel, providing a 20mm rail to fit the quick-release torch/ scope attachment - this will also attach to many picatinny/ weaver rails and 20mm pistol rails. The torch/ scope attachment has cloth tape on the inside to protect your torch or scope from scratching. Allen key included.

High Ring Mounts (Picatinny/ Weaver)

This pair of high ring mounts can be used for a high profile (24mm elevation) fitting of a torch or scope onto weaver/ picatinny rails. They are black anodised and come with cloth tape to prevent scratching of torch/ scope, quick-realease thumb screws and an Allen key for additional tightening.

NexTorch Silicone Grease for Flashlights (22g)

If you own a torch and want to keep it in good condition, you should clean and lube the threads and o-rings periodically. NexTorch Silicone Grease has a high temperature tolerance and is made for keeping torch threads and o-rings lubricated for smooth operation and to maintain waterproofing.